Our Story
Our Story Our Business Core Value
Privacy Policy

Position :Home > Products > Basic Type

Products

Products
Email:tooezg@yahoo.com
PH:1-936-651-706

Basic Type

Float Control Valve for Water Tank -- VG-3-1-1-C

The diaphragm float control valve is hydraulically driven to maintain a relatively stable level of water in the tank. When the water level rises and exceeds the maximum limit water level, the float guide valve is completely closed. When the water level drops to the lowest limit water level, the float guide valve is fully opened and the valve is automatically opened for replenishment. Built-in filter to prevent blockage of the conduit system.
Flange dimensions to EN1092-2, ANSI B16.1 Class 125
Medium: 0 °C ~ 100 °C water
Housing material: ductile iron, diaphragm: EPDM, core rod: stainless steel, conduit: copper / rubber hose
Working pressure: 175PSI, 10Bar/ 235PSI, 16Bar / 350PSI, 25Bar
Size range: 2"~12"
Float Control Valve for Water Tank -- VG-3-1-1-C
Pressure Reducing Valve -- VG-3-1-2-C

The adjustable pressure reducing valve maintains the output pressure within a preset range through a precise pressure regulator. When the output pressure exceeds the setting range of the pressure reducing valve, the main valve body and the pressure regulator will automatically close and form tightly. Seal. Built-in filter to prevent blockage of the conduit system.
Flange dimensions to EN1092-2, ANSI B16.1 Class 125
Medium: 0 °C ~ 100 °C water
Housing material: ductile iron, diaphragm: EPDM, pressure regulator: stainless steel / copper, conduit: copper / rubber hose
Working pressure: 175PSI, 10Bar/ 235PSI, 16Bar / 350PSI, 25Bar
Pressure regulation range: 0.1~5kgf/cm2, 5~9kgf/cm2, 7~17kgf/cm2
Size range: 2"~12"
Pressure Reducing Valve -- VG-3-1-2-C
Slow Control Check Valve -- VG-3-1-3-C

The slow-closed muffler check valve has a diaphragm type control valve that opens and adjusts the closing speed. Through hydraulic control, when the inlet pressure rises above the valve opening pressure, the valve opens slowly to avoid the impact. When reverse pressure is generated, the liquid enters the valve chamber and the valve closes slowly to form a tight seal. The opening and closing speed can be adjusted by the opening of the needle valve.
Flange dimensions to EN1092-2, ANSI B16.1 Class 125
Medium: 0 °C ~ 100 °C water
Housing material: ductile iron, diaphragm: EPDM, core rod: stainless steel, conduit: copper / rubber hose
Working pressure: 175PSI, 10Bar/ 235PSI, 16Bar / 350PSI, 25Bar
Size range: 2"~12"
Slow Control Check Valve -- VG-3-1-3-C
Pressure Relief Sustaining Valve -- VG-3-1-5-C

The pressure relief / holding / back pressure valve maintains pressure in the upstream line. It is a diaphragm valve that is hydraulically controlled and controlled by a pressure regulator that senses the pressure at the input of the valve through a Pilot regulator to control the opening and closing of the valve. When the input pressure exceeds the set value, the valve opens quickly to maintain the pressure in the line. After the pressure is released, the valve is slowly closed to prevent the impact.
Flange dimensions to EN1092-2, ANSI B16.1 Class 125
Medium: 0 °C ~ 100 °C water
Housing material: ductile iron, diaphragm: EPDM, pressure regulator: stainless steel / copper, conduit: copper / rubber hose
Working pressure: 175PSI, 10Bar/ 235PSI, 16Bar / 350PSI, 25Bar
Pressure regulation range: 0.1~5kgf/cm2, 2~9kgf/cm2, 7~17kgf/cm2
Size range: 2"~12"
Pressure Relief Sustaining Valve -- VG-3-1-5-C


<< < 1 > >>


Products
General Valves HVAC Water System Petrochemical
Resources
Technical Support Download Field Service How to Buy
Our Story
Our Story Our Business Core Value
Project Cases
Contact Us
Privacy Policy

Copyright © 2024  U.S. TOOE VALVE CO., LTD.   All rights reserved.      www.tooevalve.com